Driver's Door Jamb Patches This is the hole left in the door jamb and inner brace after removing the rot.
Driver's Door Jamb Patches This is a better angle of the same hole. There was not a lot to use as a guide, so hope I hope the patches turn out ok.
Driver's Door Jamb Patches Here the door jamb and inner brace are clamped into position with the door closed.
Driver's Door Jamb Patches A close up of the patches.
Driver's Door Jamb Patches Same patches with the door open. They fit pretty good, but need a little more work to fit perfectly.
Driver's Door Jamb Patches Here's a shot looking into the jamb with the door open.
Driver's Door Jamb Patches An angle of the jamb patches from inside the wheelwell.
Driver's Door Jamb Patches The door jamb patch has been welded into position and primed to prevent rusting.
Driver's Door Jamb Patches Because of the compound curves and lack of tooling the patch was two pieces welded together. Then the assembly was welded to the jamb. Looks like I was a little heavy with the primer a few runs.
Driver's Door Jamb Patches Door open view of the patch. The primer shows all the flaws. Will still need some work to be smooth.
Driver's Door Jamb Patches Another angle and boy do i still have some work to do!
Driver's Door Jamb Patches Finally the inner brace is welded in and primed.
