Rebuilt 305 and 4L60e

Rebuilt 305 and 4L60e Driver side shot of trans and engine mounted in subframe.

Rebuilt 305 and 4L60e Rear view shot of trans and engine mounted in subframe.

Rebuilt 305 and 4L60e Passenger side of trans and engine mounted in subframe. I know the trans and cross member need to be painted...I'm working on it.

Driver side cross member to locate and drill the new mounting hole. The 4L60e is about 2.75" longer that the original TH350M. So i was able to use the rear most hole on both sides and drill a new rear hole for the 4L60e.

Rebuilt 305 and 4L60e Driver side cross member to locate and drill the new mounting hole. The 4L60e is about 2.75" longer that the original TH350M. So i was able to use the rear most hole on both sides and drill a new rear hole for the 4L60e.

Passenger side is the same as the driver side. I don't have a picture but the bottom of the subframe now has a lage hole to allow a socket to fit in to tighten the cross member to the subframe.

Rebuilt 305 and 4L60e Passenger side is the same as the driver side. I don't have a picture but the bottom of the subframe now has a lage hole to allow a socket to fit in to tighten the cross member to the subframe.